Lijadora de tambor oscilante JET 16-32 con soporte, alimentación SandSmart (JWDS-1632OSC)
- Marca: JETech
- Código de Producto: B0C1RL6QZJ
-
-
$3.961.856
(En 25 a 40 días hábiles)
* Precios: Incluyen compra del producto, Importación, Aranceles e IVA. El despacho a domicilio en Chile, tiene costo extra.
-OSCILLATING DRUM FOR A CLEANER FINISH — The 5" x 16" extruded-aluminum drum moves side to side with a 1/2" stroke at 120 strokes per minute as it sands. Oscillation spreads wear across the abrasive, which reduces heat build-up and burning, minimizes visible scratch lines, and extends abrasive life. A separate switch turns oscillation on or off.
-SANDSMART FEED CONTROL AND UP TO 97% DUST CAPTURE — SandSmart monitors the load on the drum motor and automatically adjusts the 0–10 FPM variable-speed conveyor to keep the fastest feed rate without overloading. A red light signals when the cut is too deep or the feed is too fast. The hood mirrors the drum and channels dust to a 4" port, capturing up to 97% of dust with a 400 CFM (minimum) collector.
-SIZED FOR WOOD SURFACING AND THICKNESSING — Sands boards up to 16" wide in one pass or 32" wide in two passes with the open-end design. Handles stock 1/32" to 3" thick and at least 2-3/8" long. Built for cabinet doors, face frames, cutting boards, trim, inlays, and figured woods like bird's-eye or curly maple that can tear out in a planer. Use a carrier board for passes of 1/16" or less.
-TOOLLESS ADJUSTMENT AND EASY UPKEEP — Turn the knob on the outside of the conveyor bed to set parallelism without tools, then return to a positive stop. Each turn of the height handwheel moves the drum 1/16", read on the depth scale. Magnetic ceramic TRACKERS keep the belt centered, and toolless take-up clips speed up abrasive changes. Assembled size: 42-13/16"L x 20-5/16"W x 49-1/8"H; 191 lb net; 115V, 14A, 20A circuit.
-WHAT'S IN THE BOX AND 5-YEAR WARRANTY — Ships in two boxes: (1) sander with conveyor table and a pre-installed 80-grit, 3" abrasive strip, plus handle, manual and warranty card; (2) steel open stand with shelf, leveling feet and hardware. Some assembly is required. Sold separately: dust collector and hose, extra abrasives, Infeed/Outfeed Tables (723521) and Locking Casters (98-0130). 5-year warranty.
The JET JWDS-1632OSC is a 16" open-end drum sander with an oscillating drum. While the drum turns at 1,725 RPM, it also moves side to side with a 1/2" stroke at 120 strokes per minute. Oscillation keeps any one spot on the abrasive from carrying the full load. That reduces heat build-up and burning, minimizes visible scratch patterns, and helps abrasive strips last longer. A dedicated switch turns oscillation on for finish work or off for fixed-drum sanding. SandSmart feed control monitors the load on the 1-1/2 HP drum motor and automatically slows or speeds up the conveyor, which runs from 0 to 10 FPM. It never exceeds the speed you set and stops the conveyor under extreme load. The hood mirrors the shape of the drum and channels chips to a 4" port, capturing up to 97% of dust when connected to a collector rated at 400 CFM or more. Sand panels up to 16" wide in one pass or 32" wide in two, from 1/32" to 3" thick. It's well suited to cabinet doors, face frames, cutting boards, trim, inlays, and figured hardwoods. Setup and upkeep are simple: a toolless knob sets conveyor parallelism, the handwheel moves the drum 1/16" per turn, magnetic ceramic Trackers keep the belt centered, and toolless clips hold the abrasive. Includes the sander with conveyor table, a pre-installed 80-grit abrasive strip, and a steel open stand with shelf and leveling feet. It runs on standard 115V household power (14A; a 20A circuit is recommended). Infeed/Outfeed Tables (723521), Locking Casters (98-0130), and Ready-to-Wrap abrasives from 36 to 220 grit are sold separately. Backed by JET's 5-year warranty (2 years for commercial use) and a U.S. network of Authorized Service Centers.
-SANDSMART FEED CONTROL AND UP TO 97% DUST CAPTURE — SandSmart monitors the load on the drum motor and automatically adjusts the 0–10 FPM variable-speed conveyor to keep the fastest feed rate without overloading. A red light signals when the cut is too deep or the feed is too fast. The hood mirrors the drum and channels dust to a 4" port, capturing up to 97% of dust with a 400 CFM (minimum) collector.
-SIZED FOR WOOD SURFACING AND THICKNESSING — Sands boards up to 16" wide in one pass or 32" wide in two passes with the open-end design. Handles stock 1/32" to 3" thick and at least 2-3/8" long. Built for cabinet doors, face frames, cutting boards, trim, inlays, and figured woods like bird's-eye or curly maple that can tear out in a planer. Use a carrier board for passes of 1/16" or less.
-TOOLLESS ADJUSTMENT AND EASY UPKEEP — Turn the knob on the outside of the conveyor bed to set parallelism without tools, then return to a positive stop. Each turn of the height handwheel moves the drum 1/16", read on the depth scale. Magnetic ceramic TRACKERS keep the belt centered, and toolless take-up clips speed up abrasive changes. Assembled size: 42-13/16"L x 20-5/16"W x 49-1/8"H; 191 lb net; 115V, 14A, 20A circuit.
-WHAT'S IN THE BOX AND 5-YEAR WARRANTY — Ships in two boxes: (1) sander with conveyor table and a pre-installed 80-grit, 3" abrasive strip, plus handle, manual and warranty card; (2) steel open stand with shelf, leveling feet and hardware. Some assembly is required. Sold separately: dust collector and hose, extra abrasives, Infeed/Outfeed Tables (723521) and Locking Casters (98-0130). 5-year warranty.
The JET JWDS-1632OSC is a 16" open-end drum sander with an oscillating drum. While the drum turns at 1,725 RPM, it also moves side to side with a 1/2" stroke at 120 strokes per minute. Oscillation keeps any one spot on the abrasive from carrying the full load. That reduces heat build-up and burning, minimizes visible scratch patterns, and helps abrasive strips last longer. A dedicated switch turns oscillation on for finish work or off for fixed-drum sanding. SandSmart feed control monitors the load on the 1-1/2 HP drum motor and automatically slows or speeds up the conveyor, which runs from 0 to 10 FPM. It never exceeds the speed you set and stops the conveyor under extreme load. The hood mirrors the shape of the drum and channels chips to a 4" port, capturing up to 97% of dust when connected to a collector rated at 400 CFM or more. Sand panels up to 16" wide in one pass or 32" wide in two, from 1/32" to 3" thick. It's well suited to cabinet doors, face frames, cutting boards, trim, inlays, and figured hardwoods. Setup and upkeep are simple: a toolless knob sets conveyor parallelism, the handwheel moves the drum 1/16" per turn, magnetic ceramic Trackers keep the belt centered, and toolless clips hold the abrasive. Includes the sander with conveyor table, a pre-installed 80-grit abrasive strip, and a steel open stand with shelf and leveling feet. It runs on standard 115V household power (14A; a 20A circuit is recommended). Infeed/Outfeed Tables (723521), Locking Casters (98-0130), and Ready-to-Wrap abrasives from 36 to 220 grit are sold separately. Backed by JET's 5-year warranty (2 years for commercial use) and a U.S. network of Authorized Service Centers.
