MAYFLASH Magic-S PRO 2 Adaptador USB inalámbrico Bluetooth para PS4, Switch/Switch 2, macOS, Windows, Raspberry Pi, compatible con controladores Xbox Series X y S, Xbox One Bluetooth, controlador PS5 y más
- Marca: Mayflash
- Código de Producto: B09YRBZZQ3
-Bluetooth Controller Compatibility: Xbox Series X Controller, Xbox Series S Controller, Xbox One Bluetooth Controller, Xbox Elite Wireless Controller Series 2, PS5/PS4/PS3 Controller, Switch Pro, Wii mote, Wii U Pro and more. These are the controllers you connect TO the adapter - the adapter itself is NOT a PS5 console adapter; see the System Compatibility bullet for the systems it plugs into. Only ONE Bluetooth controller works with one adapter at a time. The adapter remembers up to 6 paired controllers, but only one if it is a BLE controller such as Xbox Series X/S. Switch 2 Joy-Con 2 and the Switch 2 Pro Controller are not on the supported controller list.
-Wired USB Controller Compatibility: The wireless controller that comes from your console will become a wired controller by simply connecting a standard USB cable. Full supported wired list: DualSense, DualShock 4, DualShock 3, Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40 TR, PlayStation 4 SCUF Vantage 2, SEGA MEGA DRIVE and SEGA Genesis Mini USB pads, Logitech F510 and F310, PS Classic Controller, Switch Taiko Drum, PS4 Taiko Drum. Exception: Xbox 360 requires an official Microsoft wired Xbox 360 controller. For best results use original Switch controllers, or genuine Xbox or PlayStation controllers, and quality certified USB cables.
-System Compatibility: PS4, Switch/Switch 2, Steam Deck, macOS, PC Windows, Raspberry Pi, PS3, PS Classic, MEGA DRIVE mini, Genesis Mini , NEOGEO mini, SNK NEOGEO Arcade Stick PRO, SEGA Astro City Mini and Evercade VS. PS5 is NOT a supported system - this adapter does not work on a PlayStation 5 console. Steam Deck and Evercade VS run in Xinput mode (LED green) and need firmware M:V1.10 and M:V1.14 or later. A USB Type C cable is included in the packaging - it is a USB-C to USB-A female adapter cable so you can use the adapter on a USB-C port; it is not a controller charging or data cable.
-Supports Turbo and Auto Fire (firmware M:V1.09 or later; enter with View/SHARE/SELECT + D-Pad Up 3s, then View + button: 1st press Turbo, 2nd Auto Fire, 3rd off; 3 speeds: 5/15/25 shots per second; exit with View + D-Pad Down 3s. Note: enabling Turbo increases input lag on A, B, X, Y, LB, LT, RB and RT). Supports 6-axis motion (gyroscope) on PS4 and Switch/Switch 2 - on Switch you must use Switch Pro mode (LED purple); Switch mode (LED red) does not support 6-axis motion or vibration. Supports rumble on PS4, Switch/Switch 2 (Switch Pro mode, LED purple), Xinput and PS3. The rumble intensity and dead zone can be adjusted - 7 levels each, vibration default 100%, dead zone default Level 3.
-Supports Touch Pad on PS4 only - the touch pad is not supported on any other system. On Switch the PS4 touch pad button works as the Capture button. Supports Bluetooth Headsets on PS4 and Switch: PS4 mode (LED blue) supports both A2DP high quality audio and HFP audio-and-chat - hold START + X/square for HFP, START + Y/triangle for A2DP; Switch mode (LED red) supports A2DP only. MAGIC-S PRO 2 can not connect MAYFLASH Arcade Sticks F300 and F500 to work on PS5 for PS5 games(MAGIC-S PRO 1 can).
-PLEASE READ BEFORE YOU BUY - PS5 OWNERS: this adapter does NOT work on a PlayStation 5 console. It will not let you use an Xbox, Switch or other controller on a PS5, and it does not work with PS5 games. "PS5 Controller" in the title means the PS5 DualSense is one of the controllers you connect TO the adapter, so you can use it ON a PS4, Switch, Switch 2, Windows PC, macOS, PS3, Raspberry Pi, Steam Deck, PS Classic, NEOGEO mini, NEOGEO Arcade Stick PRO, SEGA Genesis / MEGA DRIVE / Astro City Mini or Evercade VS. If you want to use a non-PS5 controller on a PS5 console, this is not the right product.
-LED COLOUR = SYSTEM MODE. Blue: PS4 / macOS. Red: Switch. Purple: Switch Pro. Yellow: PS3, PC DirectInput, Raspberry Pi. Green: PC Xinput, Raspberry Pi, Steam Deck, Evercade VS. White: NEOGEO Arcade Stick PRO, NEOGEO mini, SEGA MEGA DRIVE Mini, SEGA Genesis Mini, SEGA Astro City Mini. Cyan: PS Classic. Most systems are detected automatically; if not, press and HOLD the button on the side of the adapter for 3-5 seconds to change mode. LED blinking slowly = not connected yet, blinking quickly = pairing, solid = connected. In Switch Pro mode (purple) you must turn ON System Settings > Controllers and Sensors > Pro Controller Wired Communication, or the controller will not respond.
-SET UP IN 4 STEPS: 1. Plug the adapter into a spare USB port on your console or PC. 2. Check the LED colour matches your system - press and hold the side button for 3-5 seconds to change it. 3. Wired controller: plug it into the USB-A port on the adapter and it is ready to use. Bluetooth controller: turn the controller on, press the side button on the adapter once, then press the pair button on your controller - the LED blinks quickly. 4. The LED becomes solid when the connection succeeds; pairing can take a few seconds and may drop and reconnect once, so please wait. A wired and a Bluetooth controller can be connected at the same time, but they act as ONE player, not two.
-FIRMWARE UPDATES FIX MOST CONNECTION ISSUES - the updater is free at mayflash.com/Support. A Windows PC is needed to run the updater (it is a Windows program); the adapter itself works on your console without a PC. Hold the button on the side while plugging the adapter into the PC, wait 3-5 seconds, release, then click Update and do not unplug until it reports success.
-Wired USB Controller Compatibility: The wireless controller that comes from your console will become a wired controller by simply connecting a standard USB cable. Full supported wired list: DualSense, DualShock 4, DualShock 3, Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40 TR, PlayStation 4 SCUF Vantage 2, SEGA MEGA DRIVE and SEGA Genesis Mini USB pads, Logitech F510 and F310, PS Classic Controller, Switch Taiko Drum, PS4 Taiko Drum. Exception: Xbox 360 requires an official Microsoft wired Xbox 360 controller. For best results use original Switch controllers, or genuine Xbox or PlayStation controllers, and quality certified USB cables.
-System Compatibility: PS4, Switch/Switch 2, Steam Deck, macOS, PC Windows, Raspberry Pi, PS3, PS Classic, MEGA DRIVE mini, Genesis Mini , NEOGEO mini, SNK NEOGEO Arcade Stick PRO, SEGA Astro City Mini and Evercade VS. PS5 is NOT a supported system - this adapter does not work on a PlayStation 5 console. Steam Deck and Evercade VS run in Xinput mode (LED green) and need firmware M:V1.10 and M:V1.14 or later. A USB Type C cable is included in the packaging - it is a USB-C to USB-A female adapter cable so you can use the adapter on a USB-C port; it is not a controller charging or data cable.
-Supports Turbo and Auto Fire (firmware M:V1.09 or later; enter with View/SHARE/SELECT + D-Pad Up 3s, then View + button: 1st press Turbo, 2nd Auto Fire, 3rd off; 3 speeds: 5/15/25 shots per second; exit with View + D-Pad Down 3s. Note: enabling Turbo increases input lag on A, B, X, Y, LB, LT, RB and RT). Supports 6-axis motion (gyroscope) on PS4 and Switch/Switch 2 - on Switch you must use Switch Pro mode (LED purple); Switch mode (LED red) does not support 6-axis motion or vibration. Supports rumble on PS4, Switch/Switch 2 (Switch Pro mode, LED purple), Xinput and PS3. The rumble intensity and dead zone can be adjusted - 7 levels each, vibration default 100%, dead zone default Level 3.
-Supports Touch Pad on PS4 only - the touch pad is not supported on any other system. On Switch the PS4 touch pad button works as the Capture button. Supports Bluetooth Headsets on PS4 and Switch: PS4 mode (LED blue) supports both A2DP high quality audio and HFP audio-and-chat - hold START + X/square for HFP, START + Y/triangle for A2DP; Switch mode (LED red) supports A2DP only. MAGIC-S PRO 2 can not connect MAYFLASH Arcade Sticks F300 and F500 to work on PS5 for PS5 games(MAGIC-S PRO 1 can).
-PLEASE READ BEFORE YOU BUY - PS5 OWNERS: this adapter does NOT work on a PlayStation 5 console. It will not let you use an Xbox, Switch or other controller on a PS5, and it does not work with PS5 games. "PS5 Controller" in the title means the PS5 DualSense is one of the controllers you connect TO the adapter, so you can use it ON a PS4, Switch, Switch 2, Windows PC, macOS, PS3, Raspberry Pi, Steam Deck, PS Classic, NEOGEO mini, NEOGEO Arcade Stick PRO, SEGA Genesis / MEGA DRIVE / Astro City Mini or Evercade VS. If you want to use a non-PS5 controller on a PS5 console, this is not the right product.
-LED COLOUR = SYSTEM MODE. Blue: PS4 / macOS. Red: Switch. Purple: Switch Pro. Yellow: PS3, PC DirectInput, Raspberry Pi. Green: PC Xinput, Raspberry Pi, Steam Deck, Evercade VS. White: NEOGEO Arcade Stick PRO, NEOGEO mini, SEGA MEGA DRIVE Mini, SEGA Genesis Mini, SEGA Astro City Mini. Cyan: PS Classic. Most systems are detected automatically; if not, press and HOLD the button on the side of the adapter for 3-5 seconds to change mode. LED blinking slowly = not connected yet, blinking quickly = pairing, solid = connected. In Switch Pro mode (purple) you must turn ON System Settings > Controllers and Sensors > Pro Controller Wired Communication, or the controller will not respond.
-SET UP IN 4 STEPS: 1. Plug the adapter into a spare USB port on your console or PC. 2. Check the LED colour matches your system - press and hold the side button for 3-5 seconds to change it. 3. Wired controller: plug it into the USB-A port on the adapter and it is ready to use. Bluetooth controller: turn the controller on, press the side button on the adapter once, then press the pair button on your controller - the LED blinks quickly. 4. The LED becomes solid when the connection succeeds; pairing can take a few seconds and may drop and reconnect once, so please wait. A wired and a Bluetooth controller can be connected at the same time, but they act as ONE player, not two.
-FIRMWARE UPDATES FIX MOST CONNECTION ISSUES - the updater is free at mayflash.com/Support. A Windows PC is needed to run the updater (it is a Windows program); the adapter itself works on your console without a PC. Hold the button on the side while plugging the adapter into the PC, wait 3-5 seconds, release, then click Update and do not unplug until it reports success.