Bessey Krjr-18 K Body Revo Jr, 18 in. Cuesta paralela - 900 lbs Fuerza de sujeción nominal. Accesorios para difamadores y carpintería: abrazaderas y herramientas para carpintería, gabinetes, trabajo de casos
- Marca: Bessey
- Código de Producto: B0057PWI8A
-Well Thought Out - Ergonomically formed wooden handle
-Simple Set Up with Powerful Operation - Secure nominal clamping force up to 900 lbs. Operating jaw stays where you put it for easy set up. Position where you like and apply clamping force.
-Strong, Precise & Gentle – Capable of high strength with nominal 90 degree clamping. Non-marring pads and rail protection pieces serve to protect the workpiece from unnecessary marks.
-Cold Drawn Steel Rail Bar - Produced and tested with consistently high quality and the utmost precision in cutting-edge facilities.
-Large Clamping Surfaces - Clamping surfaces are oversized and distribute clamping force evenly. Three removable pressure caps are repellent to glue, and resistant to paint and grease solvents.
-18-Inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp
-Removeable end stop allows reversing the operating head to convert from compression force to spreading force
-Slide on plastic jaw protector pads can be removed for cleaning and replacement when worn
-Plastic rail protector pads isolate the clamp material from the steel rail to minimize any contact between clamped material and steel rails which helps avoid discoloration stining that can occur with some wood, glues and steel contact
-High clamping force (900 lbs) to weight (2.8 lbs) relationship for verstile clamping and light weight
The large jaw faces are an easily recognizable characteristic of the BESSEY K Body parallel and case clamps. They allow strong, precise and gentle clamping and spreading of workpieces. Thanks to their extra-large contact surfaces, the original BESSEY K Body REVO parallel clamp and the lightweight UniKlamp case clamp distribute clamping force evenly even when being used at high clamping forces. Cabinetmakers, Carpenters, Joiners and Kitchen fitters all benefit from the use of parallel jaw clamps because they are ideal for clamping large areas without damaging the material. When In use parallel clamps provide very accurate clamping support and are ideal for many applications including furniture making, restoration, cabinet construction, and holding large panels and frames in place when gluing. BESSEY offers the unique K Body REVO parallel clamp in two versions – with fixed (KRE) or sliding upper section (KREV) – each with a range of openings up to 2.5 meters. Both of these versions offer up to a nominal 90 degrees of clamping capability and 1700 lbs of everyday clamping force. Another advantage of the K Body REVO clamps is that they have additional workpiece supports on the rail that prevent the workpiece from coming into contact with the rail and being damaged. This also allows the clamps to be placed on the workbench and then used as a glue press. Further, the sliding clamp can also be converted to a spreading function without the need for tools, and there are also a number of accessories available. BESSEY. Simply better
-Simple Set Up with Powerful Operation - Secure nominal clamping force up to 900 lbs. Operating jaw stays where you put it for easy set up. Position where you like and apply clamping force.
-Strong, Precise & Gentle – Capable of high strength with nominal 90 degree clamping. Non-marring pads and rail protection pieces serve to protect the workpiece from unnecessary marks.
-Cold Drawn Steel Rail Bar - Produced and tested with consistently high quality and the utmost precision in cutting-edge facilities.
-Large Clamping Surfaces - Clamping surfaces are oversized and distribute clamping force evenly. Three removable pressure caps are repellent to glue, and resistant to paint and grease solvents.
-18-Inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp
-Removeable end stop allows reversing the operating head to convert from compression force to spreading force
-Slide on plastic jaw protector pads can be removed for cleaning and replacement when worn
-Plastic rail protector pads isolate the clamp material from the steel rail to minimize any contact between clamped material and steel rails which helps avoid discoloration stining that can occur with some wood, glues and steel contact
-High clamping force (900 lbs) to weight (2.8 lbs) relationship for verstile clamping and light weight
The large jaw faces are an easily recognizable characteristic of the BESSEY K Body parallel and case clamps. They allow strong, precise and gentle clamping and spreading of workpieces. Thanks to their extra-large contact surfaces, the original BESSEY K Body REVO parallel clamp and the lightweight UniKlamp case clamp distribute clamping force evenly even when being used at high clamping forces. Cabinetmakers, Carpenters, Joiners and Kitchen fitters all benefit from the use of parallel jaw clamps because they are ideal for clamping large areas without damaging the material. When In use parallel clamps provide very accurate clamping support and are ideal for many applications including furniture making, restoration, cabinet construction, and holding large panels and frames in place when gluing. BESSEY offers the unique K Body REVO parallel clamp in two versions – with fixed (KRE) or sliding upper section (KREV) – each with a range of openings up to 2.5 meters. Both of these versions offer up to a nominal 90 degrees of clamping capability and 1700 lbs of everyday clamping force. Another advantage of the K Body REVO clamps is that they have additional workpiece supports on the rail that prevent the workpiece from coming into contact with the rail and being damaged. This also allows the clamps to be placed on the workbench and then used as a glue press. Further, the sliding clamp can also be converted to a spreading function without the need for tools, and there are also a number of accessories available. BESSEY. Simply better